Kohler RXT 200 Amp Whole-House Indoor/Outdoor Service-Entrance-Rated Automatic Transfer Switch Transfer switch transfers power to and from normal source and generator. If utility power fails, transfer switch automatically starts the generator and restores power to your home. Acting as a vital part of your Kohler home backup power system, this automatic transfer switch (ATS) by Kohler continuously monitors the utility power for an interruption. If utility power fails, the transfer switch automatically transfers electrical loads from the normal source of electrical power (the utility power) to an emergency source (the generator set) when the normal source voltage or frequency falls below an acceptable level. The RXT automatic transfer switch is designed for use only with Kohler generator sets equipped with RDC2 or DC2 generator set/transfer switch controls. The transfer switch operation is controlled by the RDC2/DC2 integrated generator set/transfer switch controller, which is mounted on the following Kohler generator set models: 14RESA, 14RESAL, 20RESA, 20RESAL, 38RCL, and 48RCL. Voltage sensing data from the ATS is continuously transmitted to the RDC2/DC2 controller mounted on the generator set. When the normal source fails, the RDC2/DC2 controller signals the emergency source generator set to start. When the emergency source reaches acceptable levels and stabilizes, the ATS transfers the electrical load to the emergency source, which restores power to your home. The RDC2/DC2 controller signals the ATS to transfer the load back when the normal source returns and stabilizes. This 200 amp whole-house indoor/outdoor-rated ATS is compatible with Kohler 38RCL and 48RCL generators. It features an aluminum NEMA 3R corrosion-resistant outdoor enclosure that can withstand harsh environments. Kohler transfer switches are shipped factory-wired, factory-tested, and ready for installation. Have the equipment installed only by trained and qualified personnel, and verify that the installation complies with applicable codes and standards. Kohler RXT Automatic Transfer Switch 200 Amp Standard Features Allows utility voltage display on the RDC2/DC2 integrated generator set/transfer switch controller, available exclusively on Kohler residential and light commercial generator sets Interface board for connection to the Model RDC2 or DC2 generator set/transfer switch controller (mounted on generator set models listed above) UL listed Corrosion-resistant NEMA 3R aluminum enclosure:
--Padlockable
--Approved for indoor or outdoor installation
--ANSI 49 gray Contactor electrically and mechanically interlocked Double throw inherently interlocked design Contactor manually operable for maintenance purposes Silver alloy main contacts Transfer switches are 100% equipment rated and can be applied at the rated current without derating (non-service entrance models) 100, 200, and 400 amp standard and service entrance models are available Service entrance models include disconnect circuit breaker on the utility (normal) source side (80% rated) Optional status indicator available:
--LED indicators for source availability and contactor position
--View transfer switch status without removing enclosure cover
- 200 amp automatic transfer switch rated for whole-house indoor/outdoor use
- Compatible with Kohler 38RCL and 48RCL generators; aluminum outdoor enclosure
- Must be connected to generator set with RDC2 or DC2 generator/transfer switch controller
- Automatically transfers power to and from normal power source and generator
- Measures approximately 6.9 by 16.4 by 28.8 inches; 5-year/2000-hour limited warranty
No comments:
Post a Comment